To use ProPresenter 7 with the Graphics Add-On, follow the setup instructions below.
Steps to set up ProPresenter 7
-
Ensure that the Layouts and Screens are properly enabled in the Screens menu.
-
Wifi needs to be turned off in settings, and your computer connected to our router in port 5 with an ethernet cable.
-
Close all other applications on the computer.
-
Launch ProPresenter at least 45 minutes prior to a Produced Event and 15 minutes prior to a Static Event to ensure a connection to the live stream.
Sharing a slide with ProPresenter 7
-
To share a slide, click on the slide you would like to share.
-
Now you will see the slide on the top right preview window, this will now share the slide to the live stream.
-
To remove the slide from all displays, press the Clear All to the right of the preview window.
Additional information on ProPresenter 7
- ProPresenter Tutorial Database
- This link is a great step-by-step guide to configuring your presentation to allow for transparency in some circumstances (with only the words visible) and media/videos visible in other circumstances. Please note this is a 3rd party video via YouTube and not a LiveControl owned asset.
- This link is to a similar video created by Renewed Vision. The videos describe various destinations, but the configuration in ProPresenter is the same. The important things to note are that slides that play media (videos) should have a different layout than slides that contain lyrics only (that will be shown as an overlay to our camera feed). The videos above explain the use of ACTIONS to change the active layout to meet your needs on a slide-by-slide basis. Please note this is a 3rd party video via YouTube and not a LiveControl owned asset.
- If you need further guidance, feel free to reach out directly to Renewed Vision for support. Here is the link to their support pages.